3. Deletedrecovery
Eg: Here is a folder” my file”, whose contents are as following:
Delete it:
Empty your “recycle bin”
---------Run Data Recovery Wizard 3.0:
Select “deletedrecovery” then choose the partition that you want to recover.
Click “Next” and scan the deleted files, choose the deleted folder” my file”
Tick it and click “Next” to enter the interface of choosing path for saving files.
Choose a partition with large space to save the files
Data Recovery Book V1.0
Click “Next”, after recovery, there will be a Report interface.
If you want to check the recovered files, please click “file saved to”.
Enter the folder “found files” created by Data Recovery Wizard 3.0 and you can see the recovered folder/file:
If you are not satisfied with the result, you can use “AdvancedRecovery” module, and repeat steps above.
4.FormatRecovery
Eg: Format a partition from NTFS to FAT32
Run and choose “FormatRecovery”, and then choose the formatted partition and tick the previous file system(here is “NTFS”)in “Previous File System”
Eg: Here is a folder” my file”, whose contents are as following:
Delete it:
Empty your “recycle bin”
---------Run Data Recovery Wizard 3.0:
Select “deletedrecovery” then choose the partition that you want to recover.
Click “Next” and scan the deleted files, choose the deleted folder” my file”
Tick it and click “Next” to enter the interface of choosing path for saving files.
Choose a partition with large space to save the files
Data Recovery Book V1.0
Click “Next”, after recovery, there will be a Report interface.
If you want to check the recovered files, please click “file saved to”.
Enter the folder “found files” created by Data Recovery Wizard 3.0 and you can see the recovered folder/file:
If you are not satisfied with the result, you can use “AdvancedRecovery” module, and repeat steps above.
4.FormatRecovery
Eg: Format a partition from NTFS to FAT32
Run and choose “FormatRecovery”, and then choose the formatted partition and tick the previous file system(here is “NTFS”)in “Previous File System”
---------------------------------
Click “Next” to search files, the following steps are the same as previous methods.
Attention: if you are not satisfied with the result or you can not remember the previous file system on the partition or the program can not figure out the size of clusters on the partition, you can refer to the following steps:
Choose “AdvancedRecovery” and choose the partition
Click “Next”, the following steps please refer to previous methods.
5.Recover encrypt/compressed files in NTFS
Attention: if you want to recover encrypt/compressed file in NTFS, you need Data Recovery Wizard Professional 3.0, for Data Recovery Wizard 3.0 does not support encrypt/compressed file recovery.
Encrypt/compressed file recovery and deletedrecovery are mostly the same. But more attention should be paid to that to rightly recover encrypt/compressed files , you need use the account that create encrypt/compressed files to log on Windows; moreover, the encrypt files must be recovered and saved to partition of other NTFS type not FAT partition, or the recovered encrypt files can not be opened correctly.
------------------------------------------------------------------------------------------------------------------------------------43 6.RAW RECOVERY
When the partition file system is completely destroyed or “AdvancedRecovery” cannot find data you want, you can try “RAWRECOVERY”.
Run the program and choose the partition you want to recover
Click “Option”, choose “RAW” and tick “Recover RAW files only.”:
------------------------------------------------------------------------------------------------------------------------------------44 Click “OK” and “Next” to finish the searching operation:
Attention: this recovery module does not scan files via file system, so the files found have no usual filename and path. The program will classify the files according to the file types.
Click “Next”, the following steps are the same as the previous methods. 7. Recovery when parts of partitions are lost:
Here are the partitions before lost:
------------------------------------------------------------------------------------------------------------------------------------45
Files in the partition:
After deletion, we cannot see the partition in Windows explore:
Run Data Recovery Wizard, enter “AdvancedRecovery”, and choose the disk where you lost your partition.
Click “Next”, search the lost partition.
After searching, find the lost partition on the list, choose it:
Click “Next”, the result of search is as following:
------------------------------------------------------------------------------------------------------------------------------------48 The rest steps are the same as the previous methods.
8. Data recovery in dynamic volume
If you want to recover the data lost in a dynamic volume, you need Data Recovery Wizard Professional. Data Recovery Wizard does not support dynamic volume recovery. Data Recovery Wizard professional supports simple volume, spanned volume, striped volume, mirrored volume and RAID5.
The method is the same as that of other types of partitions.
Attention: if you have lost the dynamic volume, Data Recovery Wizard professional can not recover your data except that on simple volume.
9. Data recovery on inaccessible partition.
Before the partition was destroyed:
The files in partition are:
After the partition is destroyed, when enter the partition, it will prompts “The partition is not formatted.”
Run the program, choose AdvancedRecovery, and choose the partition.
Attention: the volume lable might have been destroyed, which may cause that the partition label cannot be shown on the partition list. In this case, you can choose partition according to the type and size of the partition.
Click “Next”, the following steps are as the previous methods.
If the program cannot recover the files, there will be a prompt message:
Choose the partition, click “Option”, and choose “Scan File System”:
Click “Scan”, analyse the possibly existing file system information, and choose “System type”
that gets the highest score:
Click” OK” to continue the recovery steps, the result of the searching is as following:
If you are not satisfied with the result, please Click “Option”, choose “RAW”, and tick “Recover Raw files only”
Keep the default, click “OK” and then click “Next”.
Attention: “RAW Function” does not scan files via file system, so the files found have no usual
filename and path. The system will classify the files according to their file types.
Click “Next”, the rest recovery steps refers to the previous methods.
10. File recovery on RAW partition
In this case, the methods are the same as that of “Data recovery on inaccessible partition.”
11. Data recovery when all the partitions are lost
When all the partitions are destroyed, you can not see any partition in disk management:
------------------------------------------------------------------------------------------------------------------------------------55
In this case, you can refer to the method of “Data recovery when parts of partitions are lost”.
If you cannot find the partition where you want to recover data when searching the partition, you can follow these steps:
Run the program, choose “AdvancedRecovery”, then choose the HD:
Click ”Next”, click ”Cancel” when searching the partition, then exit.
Tick “RawRecovery, if you cannot find the partition that you want, please click this check box”.
Roll the block to adjust the range of the sector you want to recover (you can set the range
according to the place and size of the partition):
Click “Next” to search files in specified sectors
The rest steps are the same as the previous methods.
------------------------------------------------------------------------------------------------------------------------------------58 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved Data Recovery Book V1.0 12．Data recovery when GHOST Image restore failed.
In this case, there can be different recovery scenarios according to specific damage of the partition and file system:
Usually, after the failure of GHOST Image restore, partition table of the target disk would be in some damaged condition, you can search the partition where you want to recover data by
“Searching for Partition “function in “AdvancedRecovery”.
If the partition is found, please refer to “Data recovery when parts of partitions are lost”.
If not, please refer to “data recovery when all the partitions are lost”.
13. After Partition Magic size revision/ combination/ division of partitions fails, how torecover the lost data?
In this occasion please refer to “Data recovery when GHOST Image restore failed”
14. When using Data Recovery Wizard 3.0 to recover files, there is some strange sound inHD. How to handle it?
Your HD has some hardware problems. In this occasion, you need stop running Data Recovery Wizard 3.0 at once, and then send your HD to HD maintenance station.
15. HD cannot be detected in BIOS, how to recover data by Data Recovery Wizard 3.0 The precondition of data recovery by Data Recovery Wizard 3.0 is that the storage device has no hardware problem and runs normally; or Data Recovery Wizard 3.0 can not help you. 16. There is not enough space in hard disk to save the recovered files, nor there is removablestorage device, how to handle it?
You can save you files to other host computers via network, please refer to steps as following: Choose another host computer on network:
Choose the host computer where you want to save your files, the rest steps please refer to the previous methods.
17. How to recover data in other storage devices (eg: floppy disk, flash drive, removable disketc)?
Attention: Date Recovery Wizard 3.0 supports storage devices both with MBR and without. Eg: To recover data in flash drive
Connect flash drive with host computer:
------------------------------------------------------------------------------------------------------------------------------------60
Choose different ways according to specific damage condition. Here we choose
“AdvancedRecovery”:
Click “Next”, the rest steps please refer to the previous method.
18. To recover image file, how can I know it can really recover the data before I buy DataRecovery Wizard 3.0 ?
You can use “Preview” function to preview;
Run demo version to search the files, then choose an image file, click “Preview”
Preview result:
If the programmer can preview the image, Data Recovery Wizard 3.0 can rightly recover it.
------------------------------------------------------------------------------------------------------------------------------------62 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved
Data Recovery Book V1.0 19. There are so many files recovered, how can I find the files I want fast? With “Search” and “Filter”, you can find files you want.
Eg for “Search”,
After searching:
Click “Search”:
------------------------------------------------------------------------------------------------------------------------------------63 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved
Data Recovery Book V1.0 Enter the query information of your file:
Click “Find”, the program will list the files you want:
Click “Next”, the rest steps please refer to the previous methods.
------------------------------------------------------------------------------------------------------------------------------------64 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved Data Recovery Book V1.0
20. I have recovered some files, but I cannot rightly open them. In some cases, files recovered by using Data Recovery Wizard cannot be opened, which means the data has been badly destroyed.
You can try the following steps:
1. Send the badly destroyed files to our email (repair@easeus.com); we will try our best to recover for you.
2. Try to fix them with some file recovery tools
Attentions: Some documents that are badly damaged are irrecoverable.
21. In what occasion I cannot rightly recover data?
In occasions as following, you cannot rightly recover data:
1.
Operations that cause the data are covered, such as: failure of GHOST image restore, virus attack, and mass write operation to the disk where you want to recover data etc.
2.
There are some physical problems in storage devices.
Click “Next”, the rest recovery steps refers to the previous methods.
10. File recovery on RAW partition
In this case, the methods are the same as that of “Data recovery on inaccessible partition.”
11. Data recovery when all the partitions are lost
When all the partitions are destroyed, you can not see any partition in disk management:
------------------------------------------------------------------------------------------------------------------------------------55
In this case, you can refer to the method of “Data recovery when parts of partitions are lost”.
If you cannot find the partition where you want to recover data when searching the partition, you can follow these steps:
Run the program, choose “AdvancedRecovery”, then choose the HD:
Click ”Next”, click ”Cancel” when searching the partition, then exit.
Tick “RawRecovery, if you cannot find the partition that you want, please click this check box”.
Roll the block to adjust the range of the sector you want to recover (you can set the range
according to the place and size of the partition):
Click “Next” to search files in specified sectors
The rest steps are the same as the previous methods.
------------------------------------------------------------------------------------------------------------------------------------58 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved Data Recovery Book V1.0 12．Data recovery when GHOST Image restore failed.
In this case, there can be different recovery scenarios according to specific damage of the partition and file system:
Usually, after the failure of GHOST Image restore, partition table of the target disk would be in some damaged condition, you can search the partition where you want to recover data by
“Searching for Partition “function in “AdvancedRecovery”.
If the partition is found, please refer to “Data recovery when parts of partitions are lost”.
If not, please refer to “data recovery when all the partitions are lost”.
13. After Partition Magic size revision/ combination/ division of partitions fails, how torecover the lost data?
In this occasion please refer to “Data recovery when GHOST Image restore failed”
14. When using Data Recovery Wizard 3.0 to recover files, there is some strange sound inHD. How to handle it?
Your HD has some hardware problems. In this occasion, you need stop running Data Recovery Wizard 3.0 at once, and then send your HD to HD maintenance station.
15. HD cannot be detected in BIOS, how to recover data by Data Recovery Wizard 3.0 The precondition of data recovery by Data Recovery Wizard 3.0 is that the storage device has no hardware problem and runs normally; or Data Recovery Wizard 3.0 can not help you. 16. There is not enough space in hard disk to save the recovered files, nor there is removablestorage device, how to handle it?
You can save you files to other host computers via network, please refer to steps as following: Choose another host computer on network:
Choose the host computer where you want to save your files, the rest steps please refer to the previous methods.
17. How to recover data in other storage devices (eg: floppy disk, flash drive, removable disketc)?
Attention: Date Recovery Wizard 3.0 supports storage devices both with MBR and without. Eg: To recover data in flash drive
Connect flash drive with host computer:
------------------------------------------------------------------------------------------------------------------------------------60
Choose different ways according to specific damage condition. Here we choose
“AdvancedRecovery”:
Click “Next”, the rest steps please refer to the previous method.
18. To recover image file, how can I know it can really recover the data before I buy DataRecovery Wizard 3.0 ?
You can use “Preview” function to preview;
Run demo version to search the files, then choose an image file, click “Preview”
Preview result:
If the programmer can preview the image, Data Recovery Wizard 3.0 can rightly recover it.
------------------------------------------------------------------------------------------------------------------------------------62 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved
Data Recovery Book V1.0 19. There are so many files recovered, how can I find the files I want fast? With “Search” and “Filter”, you can find files you want.
Eg for “Search”,
After searching:
Click “Search”:
------------------------------------------------------------------------------------------------------------------------------------63 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved
Data Recovery Book V1.0 Enter the query information of your file:
Click “Find”, the program will list the files you want:
Click “Next”, the rest steps please refer to the previous methods.
------------------------------------------------------------------------------------------------------------------------------------64 Copyright © 2005-2006 CHENGDU YIWO Tech Development Co.' Ltd. All Right Reserved Data Recovery Book V1.0
20. I have recovered some files, but I cannot rightly open them. In some cases, files recovered by using Data Recovery Wizard cannot be opened, which means the data has been badly destroyed.
You can try the following steps:
1. Send the badly destroyed files to our email (repair@easeus.com); we will try our best to recover for you.
2. Try to fix them with some file recovery tools
Attentions: Some documents that are badly damaged are irrecoverable.
21. In what occasion I cannot rightly recover data?
In occasions as following, you cannot rightly recover data:
1.
Operations that cause the data are covered, such as: failure of GHOST image restore, virus attack, and mass write operation to the disk where you want to recover data etc.
2.
There are some physical problems in storage devices.
0 commentaires:
Enregistrer un commentaire